Common Problems and Solutions of Metal Zippers

September 07,2022

If you've ever struggled with a zipper, you know it can be annoying. Broken zippers won't get into your favorite clothes and accessories (sometimes they don't fall out), or applying too much force could completely damage them. Fortunately, this is a common item at home, so it's relatively easy to get those little zippers working again. If the zipper gets stuck in the future and you're in trouble, look for tweezers, a pencil, or makeshift lubricant.

 

14 inch metal zipper,24 inch metal zipper,cheap metal zipper

 

How to get rid of it when caught in cloth?

 

Look for a piece of cloth stuck in the zipper. Often, the surrounding fabric gets stuck in the zipper and the zipper won't move. Look for signs of jammed, folded, tangled, or other clothing or accessories. These things are usually easy to fix.

 

When the zipper doesn't move at all, it usually gets stuck somewhere. If you don't see the zipper teeth getting stuck on anything, you can try softening it.

 

Pull the zipper out of the fabric. Once you find where the zipper hangs, grab the fabric on the hook and pull it gently. If the stuck part is small, use tweezers to grasp it easily. Grab the fabric and pull it in the opposite direction of the zipper movement.

 

You can also use the pointed portion of the peg to remove the fabric between the zipper teeth. Be careful not to pull too hard to avoid tearing the fabric.

 

Try moving the zipper up and down. While holding the cloth in place, gently pull on the zipper handle. Move the zipper in both directions to make sure the fabric is gone. In most cases, just be patient and move little by little and you'll be able to get rid of the zipper teeth. If the fabric still does not come off the zipper, it should be taken to a repair shop.

 

Avoid getting into trouble again in the future. After fixing the zipper problem, there are some precautions to prevent the same thing from happening again. Sew the broken holes, smooth out the creases, and use scissors to remove the loose seams. When you're all done, iron the fabric on both sides of the zipper and flatten it. The less fabric around the zipper teeth, the less likely it will be caught by the zipper.

 

Scrub the zipper with a pencil to lubricate

 

  1. Find a pencil. Look for graphite pens in desks, backpacks, briefcases, or junk drawers. For good results, use a standard wooden pencil rather than a sharp pencil. The wider the ends of the spacer, the easier it is to pull the graphite onto the zipper. Graphite is a very effective natural dry lubricant.

 

  1. Use the tip of a pencil to rub these areas on both zippers. While rubbing, hold the zipper with one hand. Rub the zipper until you see graphite. Focus on the line where the zipper teeth meet, where most zippers hang. Apply moderate force to prevent the lead from breaking. The ends of the zipper are coated with graphite powder for easy locking and opening.

 

  1. Try moving the zipper. Test the zipper a few times and pull it slowly and slowly. The zipper will then move freely. When you're done, wash your hands so the graphite powder from your hands doesn't get on the entire cloth, then use a paper towel to wipe off any powder that's left on your hands. Do not pull the zipper too hard. This could damage the fabric or the zipper itself.

 

  1. Repeat the above steps until the zipper moves well. If the pencil method doesn't work right away, keep trying. At one time, you may not get enough graphite and the zipper may not move. Scrub with a pencil and swipe back and forth to see if it works.

 

Conclusion

 

For more information about 14 inch metal zipper,24 inch metal zipper,cheap metal zipper, please kindly contact us at any time, we are glad to answer for you. If you want to order in quantity, hope that we will be your best choice.

SHARE US: